M12, female, angled, 4 poles, M12, male, angled, 4 poles, rail approved

Product description

Product type: Double-ended cordset

Application: Sensor/actuator, Signal transmisison

Item description:
RA-WWAK4.166-m-RA-WWAS4.166/S4501

Item-No.: V0006601

Cable quality: S4501, RADOX®

Cable length:
The individual cable length can be specified in the inquiry basket.

Inquiry

Stock: Currently out of stock.

Packaging unit: 1 pcs

Minimum quantity: 10 pcs

Quantity: Your entry was adjusted according to the minimum quantity and packaging unit. pcs

Certifications

CE UKCA SIHI E CHINA RoHS rail approved

Product details

Technical data A-Side B-Side
Coding of A A
Connector Female, angled, M12 Male, angled, M12
Contact material Metal, CuZn, gold-plated Metal, CuZn, gold-plated
Contact-carrier material Plastic, PA, BK Plastic, PA, BK
Coupling nut material Metal, CuZn, nickel-plated Metal, CuZn, nickel-plated
Current load (at 40°C) 4 A 4 A
Degree of pollution 3 3
Degree of protection (mounted) IP67 (-30°C...+90°C), IP65 (-40°C...+90°C)
Fire prevention according to DIN EN 45545-2 HL1-3
Grip body material Plastic, TPU, BK Plastic, TPU, BK
Insulation resistance ≥108 ≥108
Mechanical life-cycle >100 mating cycles >100 mating cycles
Number of pins 4 4
Pin assignment 1 WH 1, 2 WH 2, 3 WH 3, 4 WH 4 1 WH 1, 2 WH 2, 3 WH 3, 4 WH 4
Rated voltage 250V 250V
Resistance 5 mΩ 5 mΩ
Sealing (female) material FPM/FKM
Shock & vibration Class 1, Category B (DIN EN 61373)
Standards IEC 61076-2-101 IEC 61076-2-101
Temperature range Tx (-40°C...+90°C)

Halogen-free, electron-beam cross-linked cable with improved behaviour in case of fire, easy to strip, soldering resistant and flexible. The cable is intended for fixed, mechanically protected installation inside railway vehicles or for installation in applications where limited alternating bending stresses occur during operation. The cable fullfills the requirements according to EN 50306-4 and EN 45545-2 (HL1 - HL3). It is characterized by a wide temperature range and a high oil- and fuel resistance. RADOX® is a registered trademark of HUBER+SUHNER AG, Switzerland.

Technical data
Bending radius (fixed) 3xØ-cable
Bending radius (repeated) 4xØ-cable
Cable quality S4501, RADOX®
Cable-jacket material RADOX® EM 104
Fire prevention according to DIN EN 45545-2 HL1-3, DIN 5510 fire prevention-levels 1-4, NF F16-101 category A1, A2, B
Halogen-free Yes
Jacket color BK, similar RAL9005
Outer diameter of jacket 5.4 mm
Special features Increased thermal load, flame retardant, low emission of smoke, halogen free, oil- and fuel resistant, RoHs compliant
Temperature range (fixed) -40°C...+120°C
Wire colors WH 1, WH 2, WH 3, WH 4
Wire cross-section 4 x 0.75 mm²
Wire insulation material RADOX® EI 306
Wire structure 19 x 0,23 mm
Data sheets
Cad files